Polished Brass Single Drop Billiard Table Light with a range of metal and glass shade options. This solid polished brass ceiling pendant is designed to light up a small billiard table, pool table, snooker table or dining table.
Constructed in solid brass and comes with 2 standard ES lamp holders and 2 1/4″ shade holder galleries attached. Shown in the main picture is the polished brass shade. The Brass hardware finish is coated to avoid tarnishing but will require cleaning with a non-abrasive furniture polish.
Note: As all shades are hand made, imperfections can occur throughout stock. We are always open to replacing any outliers to make sure you have a consistent product.
This Polished Brass Single Drop Billiard Table Light is a perfect solution where the installation requires one central wiring point on the ceiling. This light comes in just one length at present and with clear glass cone shades is 1100mm at the base of the shades.
Pendant Suspension Drop
The brass bar suspension drop is available in various lengths. The rod suspension reduces the potential for swaying in high air movement areas, such as air conditioning or near a doorway. Supplied with cast ceiling plate and matching 4 screws and 5/8″ brass suspension drop bar.
Pendant drop bar is threaded to attach the light fitting to the ceiling canopy therefore the exact length is required when ordering.
When placing your order you will need to specify the drop length required from the ceiling canopy to the top of the shade. The total pendant suspension drop will vary depending on the shade you choose. Total suspension drop = (Pendant drop + shade height). We have included a short list of shades available and their drop dimension listed under “Lamp shade dimensions” tab so you can calculate the total pendant suspension.
You can also select the ‘no shade’ option and choose your own shades in 2 1/4″ gallery fit. Or choose bare bulb and the “no gallery” option. If you prefer a larger shade you can select a larger gallery and shade separately.
Lamp Shade Dimensions
This chart is used to fine tune pendant drop calculations
No shade: Shade height: 0mm Shade width: 0mm
Antiqued Green: Shade height:90mm 3.5″ Shade width: 200mm 7.8″
Steel hat: Shade height:80mm 3″ Shade width: 200mm 7.8″
Bronze cone: Shade height: 125mm 5? Shade width: 185mm 7.3″
Bronze dome: Shade height: 125mm 5″ Shade width: 178mm 7″
Clear cone: Shade height: 125mm 5″ Shade width: 178mm 7″
Clear dish: Shade height: 35mm 1.4″ Shade width: 220mm 8.7″
Holophane cone: Shade height: 110mm 4.3″ Shade width: 178mm 7″
Holophane dish: Shade height: 65mm 2.6″ Shade width: 200mm 7.8″
Enamel shades: Shade height: 75mm 3.0″ Shade width: 305mm 12.0″
With a larger pendant drop the bar will be made from more than one components and joined with a decorative coupler. This enables us to extent the pendant suspension for longer drops and also allow us to dismantle and save on shipping costs.
Also available as a 120V version. For 120v requirement choose E26, for 240v requirement choose E27. Note that for E26 120V lighting, UL listed components are used but the light fitting itself is not UL listed.
Also available in Bronze, Antique Brass or Nickel. A range of shades are available here and show photograph when selected from the dropdown menu. You can also select no shades option and choose your own shades in 2 1/4″ gallery fit or choose bare bulb and then a “no gallery” metal shade or add a larger gallery and shade.
This light should be hung around 32 inches above the table surface for best lighting for pool, snooker or billiards. Shaded metal shades will be a better choice for this application since player eye glare will be reduced. For larger tables two lights can be used either end to end or side by side across the table. Where used over an island bench or long dining table we provide a full choice of lamp shades for decorative flexibility.
Shipping and Installation
This small table light is packed and shipped as separated components to adhere to local and international shipping requirements.
Glass shades are always packed separated from heavy brass items. All shades and ceiling plate components are packed detached. For shipping purposes extra length lights are often sent as two separated lengths that simply require screwing together prior to installation. Your electrician can refer to the image reference online.
Only fix the shades in place once the light is fully installed. A range of shades are available or supply your own.
Billiard Table Light Features:
This is a unique design made by hand to order in our workshop. Precision brass components combined with exacting assembly make this a robust light fitting suited to commercial applications.
Vintage Edison design. Choice of overall height. Solid brass construction. 3 Solid brass lamp holders. Matching 115mm cast ceiling rose. Steel and glass shade styles.
Light fitting including or excluding galleries. Shades available in various materials and finishes.
A range of E27 bulbs will fit this light fitting. Bulbs are not included. Recommended bulbs are listed below.
Download Augmented Reality 3D App
Click on the links below when viewing with a mobile or tablet and follow the instructions to place this 3D model in your space.
What others are saying
There are no contributions yet.