Vintage Edison polished brass full size cross billiard table light. This solid brass ceiling light is designed to be installed in a pair to evenly cover a full size billiard table, pool table, snooker table. Its solid brass construction comes with 4 standard lamp holders with some shades requiring brass galleries (see images). Shown in the main picture is the 270mm flat black dome light shade, and 4 chain stiffeners with turnbuckle adjustment. Some shades have a white or off white reflector and some have natural metal color. Refer to “Metal Shades” list of hardware.
This extra large light can be used to cover a 12 foot table as a set of two lights. Shades diameters vary but this length pendant requires larger shades to cover the overall look for the length.
The Polished Brass finish of the lamp hardware is polished but not clear coated so that it will tarnish naturally and will require polishing with Brasso® to maintain its high gloss finish. Pendant maximum diagonal width is 1253mm.
Supplied with matching polished brass ceiling rose. For the 120V version, this provides a canopy for 4 inch J-Box. Choose between E27 for 240V requirements, and E26 for 120V requirements. The ceiling canopies as 120V supplied are able to connect via standard J-Box mount. Note that for E26 120V applications, UL listed components are used but the light fitting itself is not UL listed. This light should be hung around 32 inches above the table surface for best lighting for pool, snooker or billiards. Shaded metal shades will be a better choice for this application since player eye glare will be reduced. Where used over a large dining table we provide a full choice of lamp shades for decorative flexibility.
Pendant suspension drop
Pendant drop bar is a threaded item from the light fitting into the ceiling canopy and so need to be specified to your required length.
When placing your order you will need to specify the drop length required from the ceiling canopy to the top of the shade. The total pendant suspension drop will then vary depending on the shade you choose. Total suspension drop = (Pendant drop + shade height). We have included a short list of shades available and their drop dimension listed under “specifications” tab so you can calculate the total pendant suspension. You can also select no shades option and choose your own shades in 2 1/4″ fitter size. Be aware that due to the design and structure of this pendant the minimum drop length is 625mm (24.6 inches).
This chart is used to fine tune pendant drop calculations
- No shade: Shade height: 0mm Shade width: 0mm
- Antiqued Green Dome: Shade height:200mm 8.0″ Shade width: 270mm 10.
- Bronze Dome: Shade height:200mm 8.0″ Shade width: 270mm 10.6″
- Flat Black Dome: Shade height:200mm 8.0″ Shade width: 270mm 10.6″
- Antique Steel Cone: Shade height: 100mm 4.0″ Shade width: 310mm 12″
- Rustic Steel Cone: Shade height: 100mm 4.0″ Shade width: 310mm 12″
- Dark Green Cone: Shade height: 100mm 4.0″ Shade width: 310mm 12″
- Brass Flat: Shade height: 65mm 2.6″ Shade width: 310mm 12″
- Enamel Coolie Shades: Shade height: 105mm 4.0″ Shade width: 355mm 14.0″
As this selected pendant drop increases the brass component may be made from more than one bar component incorporating decorative couplers to both extend the pendant suspension but also to allow us to ship as “screw together” parts that save on shipping cost.
This billiard table light is packed and shipped as separated components. Local and international shipping requires a certain packing girth and some items require differing methods of packaging. Glass shades are always packed separated from heavy brass items. All shades are packed detached as is any ceiling plate component. Ceiling drop length and stiffener chains are supplied as install-able components. Your electrician may only require reference to the image listed online. Shades should only be fixed in place once the light is fully installed. Available in New Brass, Antique Brass, or Bronze. A range of shades are available or supply your own. Bulbs are not included and can be ordered separately depending on the hardware type and bulb shape required including LED.
Vintage Edison design. Choice of overall height. Solid brass construction. 4 Solid brass lamp holders. Matching cast ceiling rose/canopy is a standard supplied component. Steel and glass shade styles. Range of surface finishes.
A range of E27 globes will fit this light fitting. Globes are not included. Recommended globes are listed below for 270mm dome shade style. Flatter shades make require smaller globe type.