Dimmable Low Voltage GLS LED Commercial Festoon Kit at 25cm intervals

USD $59.63 Per Meter

Product Price

Warranty: 1 Year

Add low voltage tail cable * 

This cable can be used to separate the supply and LED driver away from the festoon string

Kit type * 

We can supply as a plug in solution or leave as a kit for your electrician to install. To make as dimmable it is advisable to have an electrician install wired to mains and a separate switch and dimmer.

Download PDF

Product Description

Dimmable Low Voltage GLS LED Commercial Festoon Kit at 25cm intervals. These are high quality, heavy duty cable and E27 lamp holders in one continuous length to your exact requirement for permanent commercial or domestic applications, including outdoor situations. Where public safety is required by law or for insurance purposes, these low voltage systems are the best solution. Where you have festoons that go close to passing traffic like a vertical wall treatment these provide sufficient light with a globe every 25cm. Maximum length between festoon globes is 35 meters.

Supplied with polycarbonate 1.5W 85lm LED GLS bulbs in a warm clear 2200K colour, they will create that old fashioned carnival style festoon look for parties, weddings and public display with a larger globe size. They are 60mm in diameter and are sealed to IP44 to prevent water penetrating into the bulb. Because they are powered by a high quality LED driver, the bulb life is improved considerably.

Dimmable Drivers and kits

Choose from a plug-in solution or as an electrician installable kit.
The plugin option is pre-wired and is ready to go.
The installable kit comes with all hardware loose and allows your electrician to trim the cables to exact lengths as a hardwired solution. This provides a method of installation where you would hardwire to a switch and dimmer.
This festoon comes with a 1-10V dimmable driver that is rated IP67 for out door use. We also include a 1-10V dimming switch, but this needs to be wired to a convenient location on a Clipsal or HMP wall plate. Note that the plug-in solution is not dimmable by default, but includes the dimmer switch that requires hardwiring.

Choose an optional low voltage tail (up to 10 meters) to safely increase the distance from the power source to the first lamp. This is recommended rather than using a mains connected extension lead to the driver. The mains powered driver is available in your country plug compatible versions as 240 Volt or 120 Volt.

Kit includes

For occasional and protected environments we also recommend our 240V, 20 bulb, party light kit.  It accepts a wide range of E27 Vintage Edison and LED filament bulbs.

Rated Input Voltage: 240VAC (eg. AUS, UK, NZ) or 120VAC (eg. US, CA)
Rated Output Voltage: 24VDC (SELV).
Bulbs: 24VDC 1.5 Watt 85lm 2200K GLS Polycarbonate.
Lampholder: Moulded E27 with weatherproof silicon rubber ring.
Lampholder Interval: 25cm.
Cable: Double insulated, H05RNH2 – 2 x 1.5mm2.
Cable Dimensions: 13mm x 5mm.
Maximum Festoon Length not including tails: 35m (140 Globes).
Ingress Protection: Lamp holders -IP44.  Bulbs – IP44. LV Driver – IP67.
Certifications:
LV Driver: CE, RCM, ROHS.
LED Bulbs: CE, RCM (C-Tick), ROHS

Info Sheet

Instructions