Dimmable Low Voltage GLS LED Commercial Festoon Kit at 90cm intervals. These are high quality, heavy duty cable and E27 lamp holders in one continuous length to your exact requirement for permanent commercial or domestic applications, including outdoor situations. Where public safety is required by law or for insurance purposes, these low voltage systems are the best solution. Where you have festoons that high above the ground like across a laneway, these provide sufficient light with a globe every 90 cm. Maximum length between festoon globes is 100 meters.
Supplied with polycarbonate 1.5W LED 85lm GLS bulbs in a warm clear 2200K colour, they will create that old fashioned carnival style festoon look for parties, weddings and public display with a larger globe size. They are 60mm in diameter and are sealed to IP44 to prevent water penetrating into the bulb. Because they are powered by a high quality LED driver, the bulb life is improved considerably.
Dimmable Drivers and kits
Choose from a plug-in solution or as an electrician installable kit.
The plugin option is pre-wired and is ready to go.
The installable kit comes with all hardware loose and allows your electrician to trim the cables to exact lengths as a hardwired solution. This provides a method of installation where you would hardwire to a switch and dimmer.
This festoon comes with a 1-10V dimmable driver that is rated IP67 for out door use. We also include a 1-10V dimming switch, but this needs to be wired to a convenient location on a Clipsal or HMP wall plate. Note that the plug-in solution is not dimmable by default, but includes the dimmer switch that requires hardwiring.
Choose an optional low voltage tail (up to 10 meters) to safely increase the distance from the power source to the first lamp. This is recommended rather than using a mains connected extension lead to the driver. The mains powered driver is available in your country plug compatible versions as 240 Volt or 120 Volt.
- E27 festoon cable 90m spacing
- Tail cable (length specified)
- Meanwell Dimmable LED driver (specific wattage to your total length specified)
- 1-10V dimming switch
- Connection hardware kit
- Heat shrink end cap
- LED poly carbonate globes
For occasional and protected environments we also recommend our 240V, 20 bulb, party light kit. It accepts a wide range of E27 Vintage Edison and LED filament bulbs.