White Side Entry Porcelain E27 pendant lamp holder is a rewire-able Edison type lamp holder. The threaded section is aluminum and the connector insulator is ceramic and the active terminal is hidden in such a way that it is extremely hard to accidentally touch when there is no light globe in place. Threaded base “locks” into place so that accidental unscrewing of the lamp holder base is prohibited.
Best cable to use with this lamp holder seems to be 2 core braided. We have limited stocks of two core braid but 3 core with the earth unwound will work fine. Cut cables to length to allow for lamp holder spacing, twist together actives and connect to brass connector then do the same for the neutral connector. Feed the cable back through upper exit points carefully to allow lamp holder base to screwed into position.
Fitted with fixed steel ring for connection to steel cable, light chain or other suitable hanging material. Wiring is an “in parallel” festoon style with two active wires and two neutral wires. This lamp holder can also be used as a pendant by wiring positive and neutral to either side of the lamp holder and suspending via the steel ring.
Fitted with fixed steel ring for connection to steel cable, light chain or other suitable hanging material. Cable is threaded through the side entry and can be left to loop for effect.