8 bulb holophane shade chandelier

USD $1,148.49USD $1,439.44

Quantity discounts available:
1-2425+
USD $1,148.49USD $1,091.07
Clear

Pendant Suspension Drop * 

Choose a total drop length for the pendant from your ceiling to bottom of the pendant.

Hardware Color * 

Choose 120V UL type kit

Adds J-Box ceiling plate for ceiling box fixing for USA, Canada requirements.

Warranty: 1 Year

Download PDF

Product Description

8 bulb holophane shade chandelier in solid brass. 240V with brass tubing and ceiling rose. This light fitting is a solid construction with two special 4 way hub components made from a solid piece of brass, turned and tapped specially for this type of fitting. Attached are 8 doncaster bend brass arms and E27 lamp holders. The suspension bar is solid tapped brass connecting to a cast ceiling plate with 4 fixing screws. This is a complex pendant and would be suited over a special table or entrance room. It has room for our smallest glass shades that will provide a warm soft light downwards. Available also with “no shades” option for a bare bulb effect. This option does not include galleries for shade attachment.

Pendant suspension drop

Pendant drop bar is a threaded item from the light fitting into the ceiling canopy and so need to be specified to your required length. These are employed to eliminate the potential for swaying in high air movement areas such as air conditioning or near a doorway. This light should be hung around 32 inches above a table or bench surface for best lighting.

When placing your order you will need to specify the drop length required from the ceiling canopy to the lowest point on the light fitting.

Images below main show G125 spiral and Edison vintage 25 Watt. Bulbs are not included.
Recommended bulbs are listed below.

The images shown here are a chandelier made in bronze plated brass but you can select antique brass as an option.

Where a decorative bulb is required so as not to dazzle the eyes, you can now have 8 bulbs to provide a lot more light over areas where optimal lighting is required. Low wattage LED’s can be used to great effect especially if combined with a dimmer control. Pictured with 3 Watt E27 filament LED candle bulbs this could also be fitted with vintage filament bulbs.

This fitting could handle a range of other bulb sizes, especially if no shades are used.

Complete with all components including ceiling plate, upper brass pendant tube to required length, solid brass hand assembled lamp holders. These are wired and earthed ready to connect to mains power.

When selected as 120Volt version the pendant will be manufactured using¬† UL Listed E26 Brass socket and cable, and a 4″ J-Box canopy can be supplied.

 

 

 

Indoor use only.
E27 240VAC (eg. AUS, UK, NZ) or E26 120VAC (eg. US, CA).
Integral earth wire.
Globes 60W Max.
Globes not included.

Dimensions:
Height: 600mm (Default with 200mm bar)
Width: 470mm not including shades.
Weight: Approx 4-6 kgs depending on shade selection.

Recommended globes for this product…