Insulator No42 Amber SES batten mount

USD $100.57

385 in stock

Ceiling Rose * 

Add a ceiling Rose in matching Brass Plate

Hardware * 

Choose Country voltage

Make E12 Bakelite socket 120 Volt for USA/Canada etc

Warranty: 1 Year

Download PDF

Product Description

Insulator No42 Amber SES batten mount is a 240V E14 pendant light re-manufactured telephone cable insulator having a wired in E14 lamp holder, with a brass ceiling plate attached.

The Hemingray Glass Company operated factories in Kentucky and Indiana between 1848-1972 and was the largest manufacturer of glass insulators in the world. The Hemingray 42 was one of Hemingray’s most popular and prolific insulators. These were manufactured by the millions, so most are extremely common. Those “bumps” at the bottom of the insulator are called drip points. Hemingray patented drip points on May 2, 1893 as “teats” for drawing moisture off of the insulator. Hemingray produced two styles of drip points, sharp and later round drip points. This one features sharp drip points. Whilst there are many examples of insulators and they are becoming a unique collectable, this style is so common as to make re-purposing an interesting proposition. Whilst they are common in the USA they are hard to come by in sets of similar color from Australia. In this type and color we have around 10 in stock. Due to the fact that these insulators are over quite old and have been in use atop a power pole, they are not perfect. Small chips and scratches may be visible in some examples. The dark amber color of this insulator is not a genuine color and so we have gone to great lengths the create this insulator for lighting purposes. It is molded in solid amber glass in the same way the original was made but without the internal glass thread. This allows the lamp holder to sit further into the glass leaving room for larger bulbs.

Wired with tails and a brass plated E14 lamp holder with plated brass ceiling plate, the bulb fits just inside the glass.
For 120Volt use we use an E12 Bakelite socket, wiring and you can include a 4″ J-Box cover. Components are UL Listed but the whole light is not.

Most E14 bulbs will fit this lamp and any combination of brass hardware is available.
Bulb is not included. Recommended bulbs are listed below.

 

 

Height 130mm
Width 95mm
E14 240Volt wiring and lamp holder

Recommended globes for this product…