Dimmable Low Voltage GLS LED Commercial Festoon Kit 90cm intervals

AUD $40.00 Per Meter

Weight: 10kg

Product Price

Add low voltage tail cable *

This cable can be used to separate the supply and LED driver away from the festoon string

Kit type *

We can supply as a plug in solution or leave as a kit for your electrician to install. To make as dimmable it is advisable to have an electrician install wired to mains and a separate switch and dimmer.

Warranty: 1 Year

Download PDF

Product Description

Dimmable Low Voltage GLS LED Commercial Festoon Kit 90cm intervals. These are high quality string lights, with heavy duty cable and E27 lamp holders in one continuous length. Because you are able to order the exact length required they are the ideal product for permanent installation in commercial or domestic settings.

For public safety by law or insurance purposes, these party lights are the best solution due to being low voltage. Where string lights are installed high, for example up the side of a building or strung across a large boat, 90cm spacing will provide a perfect solution at a lower cost and provide a longer string for available driver capacity.

Maximum length

Maximum length as one continuous run with one driver with these globes is 100 meters.

Supplied with polycarbonate 1.5W 85lm LED GLS bulbs in a warm clear 2200K colour, creating that old fashioned carnival style festoon look for parties, weddings and events. The globes are 60mm in diameter and are sealed to IP44 to prevent water penetrating into the bulb. Because they are powered by a high quality LED driver, the bulb life is improved considerably.

Dimmable Drivers and kits

Choose from a plug-in solution or as an electrician installable kit.
The plugin option is pre-wired and is ready to go.

The installable kit comes with all hardware loose and allows your electrician to trim the cables to exact lengths as a hardwired solution. This provides a method of installation where you would hardwire to a switch and dimmer.

This festoon comes with a 1-10V dimmable driver that is rated IP67 for out door use. We also include a 1-10V dimming switch, but this needs to be wired to a convenient location on a Clipsal or HMP wall plate. Note that the plug-in solution is not dimmable by default, but includes the dimmer switch that requires hardwiring.

Choose an optional low voltage tail (up to 10 meters) to safely increase the distance from the power source to the first lamp. This is recommended rather than using a mains connected extension lead to the driver. The mains powered driver is available in your country plug compatible versions as 240 Volt or 120 Volt.

Dimmable Low Voltage GLS LED Commercial Festoon Kit includes

For occasional and protected environments we also recommend our 240V, 20 bulb, party light kit.  It accepts a wide range of E27 Vintage Edison and LED filament bulbs.

Rated Input Voltage: 240VAC (eg. AUS, UK, NZ) or E26 120VAC (eg. US, CA).
Rated Output Voltage: 24VDC (SELV).
Bulbs: 24VDC 1.5 Watt 2200K GLS Polycarbonate.
Lampholder: Moulded E27 with weatherproof silicon rubber ring.
Lampholder Interval: 90cm.
Cable: Double insulated, H05RNH2 – 2 x 2.5mm2.
Cable Dimensions: 13mm x 5mm.
Maximum Festoon Length not including tails: 100m (110 Globes).
Ingress Protection: Lampholders -IP44. Bulbs – IP44. LV Driver – IP67.
Certifications:
LV Driver: CE, RCM, ROHS.
LED Bulbs: CE, RCM (C-Tick), ROHS

Info Sheet

Instructions

Reviews

There are no reviews yet

Add a review
Dimmable Low Voltage GLS LED Commercial Festoon Kit 90cm intervals Dimmable Low Voltage GLS LED Commercial Festoon Kit 90cm intervals
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review