Antique Brass Single Drop Billiard Table Light with a range of metal and glass shade options. This solid brass ceiling pendant is designed to light up a small billiard table, pool table, snooker table or dining table.
Constructed in solid brass and comes with 2 standard ES lamp holders and 2 1/4″ shade holder galleries attached. Shown in the main picture is the steel hat metal shade. Antique Brass finish of the lamp hardware is coated so that it will not tarnish but will require cleaning with a non-abrasive furniture polish.
Note: As all shades are hand made, imperfections can occur throughout stock. We are always open to replacing any outliers to make sure you have a consistent product.
This Antique Brass Single Drop Billiard Table Light is is a perfect solution where one central wiring point is required for installation. This light currently comes in just one length. It measures 1100mm from top to base of the glass cone shade.
Pendant Suspension Drop
Pendant drop bar is threaded to attach the light fitting to the ceiling canopy therefore the exact length is required when ordering.
The brass bar suspension drop is available in various lengths. The rod reduces the potential for swaying in high air movement areas such as air conditioning or near a doorway. Standard length tube and decorative joiners compliment the style of the light fitting. Supplied with cast ceiling plate and matching 4 screws and 5/8″ brass suspension drop bar.
When placing your order you will need to specify the drop length required from the ceiling canopy to the top of the shade. The total pendant suspension drop will then vary depending on the shade you choose. Total suspension drop = (Pendant drop + shade height). We have included a short list of shades available and their drop dimension listed under “documents” tab so you can calculate the total pendant suspension.
You can also select the ‘no shade’ option and choose your own shades in 2 1/4″ gallery fit. Or choose bare bulb and the “no gallery” option. If you prefer a larger shade you can select a larger gallery and shade separately.
Lamp Shade dimensions
Use this chart to calculate drop fine tune pendant drop calculations
No shade: Shade height: 0mm Shade width: 0mm
Antiqued Green: Shade height:90mm 3.5″ Shade width: 200mm 7.8″
Steel hat: Shade height:80mm 3″ Shade width: 200mm 7.8″
Bronze cone: Shade height: 125mm 5? Shade width: 185mm 7.3″
Bronze dome: Shade height: 125mm 5″ Shade width: 178mm 7″
Clear cone: Shade height: 125mm 5″ Shade width: 178mm 7″
Clear dish: Shade height: 35mm 1.4″ Shade width: 220mm 8.7″
Holophane cone: Shade height: 110mm 4.3″ Shade width: 178mm 7″
Holophane dish: Shade height: 65mm 2.6″ Shade width: 200mm 7.8″
Enamel shades: Shade height: 75mm 3.0″ Shade width: 305mm 12.0″
As this selected pendant drop increases the brass component may be made from more than one bar component incorporating decorative couplers to both extend the pendant suspension but also to allow us to ship as “screw together” parts that save on shipping cost.
Choose between E27 for 240V requirements, and E26 for 120V requirements. Note that for E26 120V applications, UL listed components are used but the light fitting itself is not UL listed.
This billiard table light is packed and shipped as separated components. Local and international shipping requires a certain packing girth and some items require differing methods of packaging. Glass shades are always packed separated from heavy brass items. All shades are packed detached as is any pendant upright or ceiling plate component. A very simple assembly is required when installing. Shades should only be fixed in place once the light is fully installed.
Also available in New Brass, Antique Bronze or Nickel. A range of shades are available here and show photograph when selected from the dropdown menu. You can also select no shades option and choose your own shades in 2 1/4″ gallery fit or choose bare bulb and then a “no gallery” metal shade or add a larger gallery and shade.
This is a unique design made by hand to order in our workshop. Precision brass components combined with exacting assembly make this a robust light fitting suited to commercial applications. This light should be hung around 32 inches above the table surface for best lighting for pool, snooker or billiards. Shaded metal shades will be a better choice for this application since player eye glare will be reduced. For larger tables two lights can be used either end to end or side by side across the table. Where used over an island bench or long dining table we provide a full choice of lamp shades for decorative flexibility.
Bulbs are not included and can be ordered separately depending on the lumen output and bulb shape required as vintage filament or LED filament.
Vintage Edison design. Choice of overall height. Solid brass construction. 3 Solid brass lamp holders. Matching 115mm cast ceiling rose. Steel and glass shade styles.
Light fitting including or excluding galleries.
Shades available in various materials and finishes.
A range of E27 bulbs will fit this light fitting. Bulbs are not included. Recommended bulbs are listed below.
Download Augmented Reality 3D App
Click on the links below when viewing with a mobile or tablet and follow the instructions to place this 3D model in your space.
What others are saying
There are no contributions yet.