Vintage Edison Extra Long Billiard Table Light. This solid brass ceiling pendant is designed to light up a larger billiard table, pool table, snooker table or dining table. Its solid brass construction comes with 4 standard lamp holders with some shades requiring brass galleries (see images). Shown in the main picture is the 270 mm antique green dome shade, with bronze hardware finish. Some shades have a white or off white reflector and some have natural metal color. Refer to “Metal Shades” list of hardware.
Main brass hardware can be selected from the drop down as can a shades option. You can also select a “no shade” option and select a lamp shade type from our hardware section as a separate item.
This extra long pendant can be used to cover a 9 foot table as 1536mm version (pictured) or a 12 foot table as an 1840mm long version. Shades diameters vary but this length pendant requires larger shades to cover the overall look for the length. Both bar connections supply power. Antique Brass and Bronze finish of the lamp hardware is coated so that it will not tarnish but will require cleaning with a non-abrasive furniture polish. The New Brass finish of the lamp hardware is polished but not clear coated so that it will tarnish naturally and will require polishing with Brasso® to maintain its high gloss finish. Standard pendant width is 1536mm.
A wider option is available with lamps separated to make 1840 from outside lamp holders.
Pendant suspension drop
Pendant drop bars are a threaded item from the light fitting into the ceiling canopy and so need to be specified to your required length. These are employed to eliminate the potential for swaying in high air movement areas such as air conditioning or near a doorway. For a cable pendant style fitting see our Vintage Edison Extra Long Billiard Table Pendant. This light should be hung around 32 inches above the table surface for best lighting for pool, snooker or billiards. Shaded metal shades will be a better choice for this application since player eye glare will be reduced. For the larger full size tables two shorter lights can be used either side by side across the table. Where used over an island bench or long dining table we provide a full choice of lamp shades for decorative flexibility. When placing your order you will need to specify the drop length required from the ceiling canopy to the top of the shade. The total pendant suspension drop will then vary depending on the shade you choose. Total suspension drop = (Pendant drop + shade height). We have included a short list of shades available and their drop dimension listed under “Lamp shade dimensions” tab so you can calculate the total pendant suspension. You can also select no shades option and choose your own shades in 2 1/4″ fitter size or choose bare bulb to add a larger fitter and shade. As this selected pendant drop increases the brass component may be made from more than one bar component incorporating decorative couplers to both extend the pendant suspension but also to allow us to ship as “screw together” parts that save on shipping cost.
This chart is used to fine tune pendant drop calculations
- No shade: Shade height: 0mm Shade width: 0mm
- Antiqued Green Dome: Shade height:200mm 8.0″ Shade width: 270mm 10.
- Bronze Dome: Shade height:200mm 8.0″ Shade width: 270mm 10.6″
- Flat Black Dome: Shade height:200mm 8.0″ Shade width: 270mm 10.6″
- Antique Steel Cone: Shade height: 100mm 4.0″ Shade width: 310mm 12″
- Rustic Steel Cone: Shade height: 100mm 4.0″ Shade width: 310mm 12″
- Dark Green Cone: Shade height: 100mm 4.0″ Shade width: 310mm 12″
- Brass Flat: Shade height: 65mm 2.6″ Shade width: 310mm 12″
- Enamel Coolie Shades: Shade height: 105mm 4.0″ Shade width: 355mm 14.0″
Supplied with matching brass ceiling roses. For the 120V version, 4inch J-Box canopies will be supplied. Choose between E27 for 240V requirements, and E26 for 120V requirements. The ceiling canopies as 120V supplied are able to connect via standard J-Box mount. Note that for E26 120V applications, UL listed components are used but the light fitting itself is not UL listed. This light should be hung around 32 inches above the table surface for best lighting for pool, snooker or billiards. Shaded metal shades will be a better choice for this application since player eye glare will be reduced. For the larger full size tables two longer lights can be used side by side down the table. Where used over an island bench or long dining table we provide a full choice of lamp shades for decorative flexibility.
This billiard table light is packed and shipped as separated components. Local and international shipping requires a certain packing girth and some items require differing methods of packaging. Glass shades are always packed separated from heavy brass items. All shades are packed detached as is any ceiling plate component. Extra length lights are often sent as two separated lengths that simply require screwing together prior to installation. Your electrician may only require reference to the image listed online. Shades should only be fixed in place once the light is fully installed. Available in New Brass, Antique Brass, Bronze or Nickel plate. A range of shades are available or supply your own. Bulbs are not included and can be ordered separately depending on the hardware type and bulb shape required including LED.
Vintage Edison design. Choice of overall height and width. Solid brass construction. 4 Solid brass lamp holders. Matching ceiling roses available option. Steel and glass shade styles. Range of surface finishes.
Light fitting including lamp holders and galleries available in New Brass, Antique Brass, Bronze and Nickel plated. Shades available in various materials and finishes.
A range of E27 globes will fit this light fitting. Globes are not included. Recommended globes are listed below for 270mm dome shade style. Flatter shades make require smaller globe type.
Download Augmented Reality 3D App
Click on the links below when viewing with a mobile or tablet and follow the instructions to place this 3D model in your space.