Product Description

940 mm half inch solid brass pipe loop LED tube light is a minimalist version of our bent plumbing pipe light range made in-house with custom components. The modern LED tube light is also made in-house to exacting standards using the best LED strip components available.
There is no glass used in this tube since there is no requirement to vacuum fill like a fluorescent tube.

They are an industrial style that we think would work well in an industrial themed smaller office, cafe or hotel. Incorporating a 600mm length LED, they may also provide lighting for food preparation areas i.e., for shatterproof requirement in commercial kitchen situations. These supply a good amount of light when at a reasonable distance from the work area.

Plumbing pipe components are made from solid brass components that will last a lifetime. Brass surface is left polished but un coated so to remain polished they will need a surface polish with Brasso once every 6 months. Or you can leave to allow the brass to tarnish over time creating an antique brass color.

This light is made from half inch BSP plumbing pipe and so the outside diameter is 22mm.
Fixing points on the ceiling are 520mm centers.
Only one requires a wiring point.

Suspension system

Cable suspension is stainless steel with loops made with appropriate ferrules. For stainless wire we use 1.6mm 7X7 strand. Photographs show hung with stainless steel.  If you have a required precise length please select the length closest to required and advise in “order notes” section on the checkout when ordering.

Wiring and globes

The driver location can be concealed in the ceiling space or surface mounted. All new wiring is completed ready to be installed by your electrician. We supply two hooks installed to allow use as a pendant. LED tube can removed by pushing to one end where the other end will drop. Low voltage cables have small individual plugs to disconnect.

Choose between 240V and 120V to suit your Country voltage.  For US and Canada, UL listed components are used but the light fitting itself is not UL listed.
TRIAC Dimming is compatible with most mains-connected trailing or leading edge dimmers. 1-10V dimming can be used with any 1-10V dimmer or other systems such as DALI. You can also choose to have this supplied with no driver and supply your own to supply 24 volt constant voltage to suit your control system.

We can include special chain hook ceiling plates, s-Hooks, Carabiners or shackles. We also supply stainless cable, Thimbles and Ferrules.