1300mm Vintage green explosion proof twin tube light

USD $865.80

Quantity discounts available
1-56+
USD $865.80USD $735.93

27 in stock

Warranty: 1 Year

LED Type * 

Choose here the LED color and total lumen output

Internal LED Tube Cover * 

Choose a cover that makes the LED’s visible or hidden with an opaque cover (see gallery image)

Suspension Type * 

Choose here the style and length of suspension required. If you require a different variation of these lengths let us know when ordering. This will come as a double chain both ends at the suspension length.

Ceiling Hooks * 

Add here two ceiling hooks in Aluminum. If Wall/Ceiling mount is chosen above no ceiling hooks are required.

Choose Country Voltage * 

Note: For USA and Canadian requirements, this does not provide a UL Listed product, but provides UL Listed drivers and wiring.

Download PDF

Product Description

1300mm Vintage green explosion proof twin tube light is a restored ship light previously employed in ships’ engine rooms, cargo decks and similar areas. This 1300mm Vintage green explosion proof twin tube light was designed to allow efficient lighting on LNG or LPG carriers and chemical container ships where explosion proof lighting is essential. Built in the 1990’s, these light fittings are extremely heavy duty weighing around 22kg each.

These lights come with their original cage and reflector but these can be removed when installing to create a different look. It may be that you require light to spill upwards, so you would remove the reflectors. See gallery images.

They are ridiculously over engineered for the purpose we now see them being used for, but they are an industrial style that we think would work well in an industrial themed cafe or bar. Incorporating two glass containment tubes, they may also provide lighting for food preparation areas i.e., shatterproof. These lights have been cleaned and refitted, but not to a “perfect surface”. We clean them up as best we can, but they will show signs of wear and some paint spatters consistent with their age. The original ballast and the fluorescent tubes are removed and the light fitting is then retro-fitted with high quality (CRI90), low voltage LED strip inside an aluminium profile. The LED can be dimmed via the driver.

Wiring and globes

The driver location is inside the old ballast tube at the top of the fitting but it can be concealed in the ceiling space or surface mounted. Wiring is completed ready to be installed by your electrician. We supply chain suspension when installed as a pendant. Each end should use two chains however this can be altered. Alternatively, you can hard mount it to a ceiling or to a wall vertically.

Choose between 240V and 120V to suit your Country voltage.  For US and Canada, UL listed components are used but the light fitting itself is not UL listed.
TRIAC Dimming is compatible with most mains-connected trailing or leading edge dimmers. 1-10V dimming can be used with any 1-10V dimmer or other systems such as DALI. This twin tube LED can be ordered 45 Watt total at 3400lm or 90 Watt at 6800lm.

A 4 meter length of flex cable in black braid is also supplied as standard. For 220-240V driver we can install the driver inside the fitting and wire with 5 core cable. This will provide active, neutral and earth along with a dimming circuit. For 110-120V  we wire with one 3 core cable and one 2 core cable for dimming circuit.

Please note these light fittings are refurbished and no longer certified as vapour or explosion proof. Therefore they are not suitable for hazardous applications.

Indoor use only
240VAC (eg. AUS, UK, NZ) or E26 120VAC (eg. US, CA).
Rated Watts: 45W or 90W total
Light Source: 2 x SMD3528 60/M or 120/M CRI90
Lumens: 3400lm – 6800lm
Colour Temperature: Warm (3000k) or Natural (4000k)
Dimmable: Yes via driver

Dimensions:

Length: 1300mm
Width: 300mm
Height: 300mm
Weight: 22kgs