750mm Vintage polished aluminium explosion proof twin tube light

AUD $1,555.00

Weight: 18kg

3 in stock

LED color temperature *

Internal LED Tube Cover *

Choose a cover that makes the LED’s visible or hidden with an opaque cover (see gallery image)

Suspension Type *

Choose here the style and length of suspension required. If you require a different variation of these lengths let us know when ordering. This will come as a double chain both ends at the suspension length.

Ceiling Hooks *

Add here two ceiling hooks in Aluminum. If Wall/Ceiling mount is chosen above no ceiling hooks are required.

none Rough Cast Aluminium X 2 (suits J-Box installation) +AUD $92.00 Large Polished Aluminium X 2 +AUD $51.00

Choose Country Voltage and dimming solution *

Note: For USA and Canadian requirements, this does not provide a UL Listed product, but provides UL Listed drivers and wiring.

Warranty: 1 Year

Download PDF

Product Description

750mm Vintage polished aluminium explosion proof twin tube light is a restored ship light previously employed in ships’ engine rooms, cargo decks and similar areas. This 750mm Vintage polished aluminium explosion proof twin tube light was designed to allow efficient lighting on LNG or LPG carriers and chemical container ships where explosion proof lighting is essential. Built in the 1990’s, these light fittings are extremely heavy duty weighing around 18kg each.

These lights come with their original cage and reflector but these can be removed when installing to create a different look. It may be that you require light to spill upwards, so you would remove the reflectors.

They are ridiculously over engineered for the purpose we now see them being used for, but they are an industrial style that we think would work well in an industrial themed cafe or bar. Incorporating two glass containment tubes, they may also provide lighting for food preparation areas i.e., shatterproof. These lights have been cleaned, polished and refitted, but not to a “perfect surface”. We clean them up as best we can, but they will show signs of wear and some paint spatters consistent with their age. The original ballast and the fluorescent tubes are removed and the light fitting is retro-fitted with high quality (CRI90), low voltage LED strip inside a custom made aluminium profile. The LED can be dimmed via the driver.

Wiring and globes

The driver is located inside the old ballast tube at the top of the fitting. Wiring is completed ready to be installed by your electrician. We supply chain suspension when installed as a pendant. Each end should use two chains however this can be altered. Alternatively, you can hard mount it to a ceiling or to a wall vertically.

Choose between 240V and 120V to suit your Country voltage.  For US and Canada, UL listed components are used but the light fitting itself is not UL listed.
TRIAC Dimming is compatible with most mains-connected trailing or leading edge dimmers. 1-10V dimming can be used with any 1-10V dimmer or other systems such as DALI. You can also choose to have this supplied with no driver and supply your own to supply 24 volt constant voltage to suit your control system.

For 1-10V dimming selection a 4 meter length of flex cable in black braid is also supplied as standard. For 220-240V 5 core cable is supplied. This will provide active, neutral and earth along with two wires for the dimming circuit. For 110-120V  we supply one 3 core cable for power and ground, and one 2 core cable for the dimming circuit.

For TRIAC (mains dimming) we supply 4 Meters of 3 core cable, since dimming control is on the mains wiring.

Please note these light fittings are refurbished and no longer certified as vapour or explosion proof. Therefore they are not suitable for hazardous applications.

Indoor use only
240VAC (eg. AUS, UK, NZ) or E26 120VAC (eg. US, CA).
Rated Watts: 45W total
Light Source: 2 x 3528 120/M CRI90
Lumens: 3200lm
Colour Temperature: Warm (3000k) or Natural (4000k)
Dimmable: Yes via driver

Dimensions:

Length: 750mm
Width: 330mm
Height: 300mm
Weight: 17kgs

Reviews

There are no reviews yet

Add a review
750mm Vintage polished aluminium explosion proof twin tube light 750mm Vintage polished aluminium explosion proof twin tube light
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review