Brass Round Horizontal Cage Bulkhead Ship Light

AUD $259.09

Out of stock

Download PDF

Product Description

Brass Round Horizontal Cage Bulkhead Ship Light. Retrofitted for use as 240V E27 brass fitting. This ship light is of solid brass construction with a rough cast appearance and aged glass cover.  Salvaged from the massive 1950’s era ship breaking yards in Bangladesh.

Fit to walls or ceilings using the four mountings that are bolted into position. Powered  by conduit connection and so some fiddling with elbows may be required for a clean installation. Connect to external mounted conduit for an authentic look using brass plumbing fittings and copper pipe.  These bulkheads lights can be fitted in series as there are conduit holes either end of the cable service box.

The four wingnuts when undone provide a hinge for the brass cage which had a rubber sealed glass dome in thick old glass. Bulbs are replaced through this front hinged cage. This bulkhead light is a massive 5.4 kilos of solid polished old brass with a patina from years at sea. Aluminium reflector inside the light can be removed to reduce the light temperature and dull the effect.

Vintage ship light

Ship breaking or ship demolition is a type of ship disposal involving the breaking up of ships for scrap recycling. Most ships have a lifespan of a few decades before there is so much wear that refitting and repair become uneconomical. Ship breaking allows materials from the ship, especially steel, to be recycled. Equipment on board the vessel can also be reused.

This is a great way to obtain the highest quality solid brass lighting components for use in industrial style design. All lamp parts show their age in a wonderful polished patina, some have more marks than others but all are acceptable wear for age given these are from Japanese ship building made after the war. This ship light was originally stamped IP64 but re polishing has removed the mark. We would consider these to be IP Rated however careful installation is required to achieve this.

Comes with an E27 Brass Lamp holder with internal earth connection.

Bulb not included. Requires a GLS sized E27 globe either vintage or LED.
Recommended bulbs are below.

Now comes with or without aluminium reflector so the effect is either brass reflector or brighter flat aluminium reflector for greater output. Recommended bulbs are below.

 

170mm High
280mm length vertical
260mm Wide across cage

Recommended globes for this product…