Brass Ships Round Cage Bulkhead Light

AUD $360.00

Weight: 4.3kg

7 in stock

Choose your Voltage and hardware *

Choose a different voltage 120V ie. FOR USA AND CANADA REQUIREMENTS. Adds wall plate for wall J-box fixing with UL Listed E26 socket. This does not provide a UL Listed product but will contain UL Listed hardware.
Choose to be wired with tails for Junction box wiring or no tails for mains hard wiring.

Warranty: 1 Year

Download PDF

Product Description

Brass Ships Round Cage Bulkhead Light.  Retrofitted for use as 240V E27 brass fitting. This is of solid brass construction with a rough cast appearance and aged glass cover.  Salvaged from the massive 1950’s era ship breaking yards in India.

Fit to walls or ceilings using the four mountings that are bolted into position. Powered  by conduit connection and so some fiddling with elbows may be required for a clean installation. They can be connected to external mounted conduit for an authentic look using brass plumbing fittings and copper pipe. Multiple bulkhead lights can be fitted in series as some have two conduit holes on the cable service box.

The four wingnuts/knobs when undone provide a hinge for the brass cage which had a rubber sealed glass dome in thick old glass. Bulbs are replaced through this front hinged cage. This bulkhead light is a reasonable 4.3 kilos of solid polished old brass with a patina from years at sea. Reflector surface inside the light is a result of polishing the inside of the cast brass base.

These were originally stamped IP64 but re polishing has removed the mark. They would be considered by us to be IP Rated with careful attention when installing however.

Vintage ship lighting

Ship breaking or ship demolition is a type of ship disposal involving the breaking up of ships for scrap recycling. Most ships have a lifespan of a few decades before there is so much wear that refitting and repair become uneconomical. Ship breaking allows materials from the ship, especially metal, to be recycled. Equipment on board the vessel can also be reused.

This is a great way to obtain the highest quality solid brass lighting components for use in industrial style design. All lamp parts show their age in a wonderful polished patina, some have more marks than others but all are acceptable wear for age.

Comes complete fitted with a 4 AMP threaded entry E27 Brass Lamp holder  with internal earth connection.

Bulb not included. Requires a GLS sized E27 globe either vintage or LED.
Recommended bulbs are below.

120mm Thick
230mm length vertical
270mm Wide across cage

Reviews

There are no reviews yet

Add a review
Brass Ships Round Cage Bulkhead Light Brass Ships Round Cage Bulkhead Light
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review

Recommended 240 Volt globes for this product…