Wood Beam LED Pendant Light No.1

USD $801.01

Warranty: 1 Year

Cable Colour * 

Pendant Drop Height * 

Select overall pendant drop height.

Voltage * 

Select mains input voltage.

Dimmable * 

Select here a dimming requirement

Colour Temperature * 

Select colour temperature of LED.

Download PDF

Product Description

This Wood Beam LED Pendant Light is an old-worldly composition of timber and steel contrasted with the clean modern look of embedded LEDs. This is a custom product from Little Anvil – handmade in Melbourne.

The steel work of our pendant is all hand fabricated, heat blackened and sealed with linseed oil which provides a beautifully antiqued and aged finish that is dry to the touch. The rustic Cypress wood has been through a four stain process and sealed with wipe on poly. A final light coat of wax is applied and polished. Each wooden beam will have the same colour tone but will be completely uniquely distressed. We have added a custom electro-etched boiler plate to this product to complete the vintage industrial look and feel. Two custom steel plates are provided to tether the pendant LED to the ceiling via chain and S hooks.

This light is perfectly suited for use in a multitude of environments. Due to the quality of light provided and warm tones of the wood, this would be ideal over a dining table, a bar counter, food service area, billiards or snooker table, passageway lighting or could be used in any environment that requires an authentic vintage look. The LED driver is recessed out of view into the top of the timber. It may also be suitable for use in areas where glass bulbs are not permitted and shatter proof requirements are in place.

This light comes with an overall drop height of 1500mm that can be adjusted shorter via the chain links. It can also be increased by using the options provided. The standard beam size is 90mm wide x 90mm high x 1200mm long. However, we can build these lights to other specific lengths or scale up to larger dimensions of timber, please contact us if you have an idea or require a custom build.


It comes wired and ready to install by your electrician. Mains power runs to one ceiling plate and the 1-10V dimmer connection can be made to run up the other side. Please consult with your electrician to make your selection. Dimming can be selected as wired using single 5 core or as two separate cables. Refer to data sheet as product download pdf.

DALI control is possible with the addition of a DALI to PWM Converter. We suggest the Meanwell DAP-04-S01DM. In addition, the DAP-04-S01DM module can accommodate a single momentary push button to control dimming and mains side on-off functions. Up to 20 light fittings can be controlled from one push button.

All required lighting components come with either SAA, RCM for Australia and New Zealand, CE for Europe or UL listing for the US and Canada. Please note, this light fitting is built to order and may take up to four weeks to produce from date of payment.

Custom fabricated steel components.
Uniquely distressed vintage style wood.
Choice of fabric cable.
Custom boiler plate.

Indoor use only.
Input Voltage: 240VAC (eg. AUS, UK, NZ) or 120VAC (eg. US, CA).

Rated Wattage (LED Driver): 40W
LED: SMD strip. 12V -24V 20,000Hrs
Colour Temperature: Optional
Colour Rendition Index: >80
Cool White
Natural White
Warm White
Dimmable: Yes

There are three possible modes of dimming. The driver will automatically detect the mode used.
1. 0-10VDC Potentiometer Dimer
2. 10V PWM signal – frequency range 100Hz ~ 3KHz
3. Resistive – 100K Potentiometer. (Only suitable for dimming a single light fitting/driver.)

Width: 1200mm
Depth: 120mm
Drop Height: 1500mm Standard